 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Rocktron XTune Tuner $89.99 | |
that make it easy to tune on dark stages.
Built into Rocktron’s usual strong aluminum chassis, the X-Tune allows muting
for silent tuning, and continuous out for live tuning. The X-Tune handles 12
Note tuning and a 7 octave range. A calibration switch is provided. Note
Indicator LEDs show the actual note being tuned. A row of notes will actually
light up when the X-Tune is turned on, and during tuning the LED under each
note being tuned will light up. A Flat Indicator LED will flash if the note being
played is flat. The more “flat” the note is, the faster the LED will flash. An In
Tune LED will light when the note being played is actually “in tune”. A Sharp
Indicator LED will flash if the note being played is sharp. Again, the more
“sharp” the note is, the faster the LED will flash.
The X-Tune includes a Calibration Button which is used to calibrate the unit to
match the pitch of any instrument or audio source (like a piano or tape player).
The X-Tune includes a Continuous Output Jack (Out To Amp) allowing you to
connect a standard guitar cable with a ¼” jack to your next effect or directly
into your amplifier if you want to hear the note being tuned.The X-Tune
includes a Mute Silent Tuning Jack allowing you to mute the output of your
guitar going to your amplifier or next stomp box so that you can tune in silence.
An On/Off Switch determines whether the X-Tune is “on” or “off” and the
Blue LED will light when the unit is on. An easy-access 9 Volt Battery
compartment is on board, as with most Rocktron pedals.
Built into Rocktron’s usual strong aluminum chassis, the X-Tune allows muting
for silent tuning, and continuous out for live tuning. The X-Tune handles 12
Note tuning and a 7 octave range. A calibration switch is provided. Note
Indicator LEDs show the actual note being tuned. A row of notes will actually
light up when the X-Tune is turned on, and during tuning the LED under each
note being tuned will light up. A Flat Indicator LED will flash if the note being
played is flat. The more “flat” the note is, the faster the LED will flash. An In
Tune LED will light when the note being played is actually “in tune”. A Sharp
Indicator LED will flash if the note being played is sharp. Again, the more
“sharp” the note is, the faster the LED will flash.
The X-Tune includes a Calibration Button which is used to calibrate the unit to
match the pitch of any instrument or audio source (like a piano or tape player).
The X-Tune includes a Continuous Output Jack (Out To Amp) allowing you to
connect a standard guitar cable with a ¼” jack to your next effect or directly
into your amplifier if you want to hear the note being tuned.The X-Tune
includes a Mute Silent Tuning Jack allowing you to mute the output of your
guitar going to your amplifier or next stomp box so that you can tune in silence.
An On/Off Switch determines whether the X-Tune is “on” or “off” and the
Blue LED will light when the unit is on. An easy-access 9 Volt Battery
compartment is on board, as with most Rocktron pedals.